Welcome to the official website of Shenyang Pengcheng nonmetal Equipment Co., Ltd!

Telephone:400-100-4600 Address:Daxing Industrial Park, Yuhong District, Shenyang

Home > News

NEWS

-
Professional production of refractory processing equipment for 25 years

What are the factors that affect the service life of glass furnace refractories?
Shenyang refractory brick mill manufacturers introduced that the size, quality, and production effect of the kiln are different due to the type of glass produced. Through the comparison and analysis of the performance of the refractory, the use effect of
Source: Network

These 5 types of refractory bricks can be said to be the most commonly used in the construction of hot blast stoves!
With the maturity of domestic hot blast stove technology, hot blast stoves are increasingly stricter on the requirements of refractory bricks in the furnace, especially in the high temperature area, the temperature in the furnace is as high as about 1300
Source: Network

Principle of refractory damage in use
Furnace for metallurgical and other purposes is operated continuously under high temperature for a long time, the working conditions of refractory are bad and it is easy to be damaged. There are many factors that cause refractory damage, but Shenyang refr
Source: Network

Have you considered these factors when buying blast furnace refractory bricks?
Shenyang refractory brick grinder manufacturer Pengcheng Non-metal Company introduced that the furnace throat is located on the top of the blast furnace, the temperature is low, and it can withstand the erosion of blast furnace gas and the impact of human
Source: Network

Ways and methods to improve compressive strength of refractory bricks
Increasing the molding pressure of the refractory brick mill makes the density of refractory bricks higher. Only by increasing the density of the bricks can high-strength sintered bricks be fired. The compressive strength of fired bricks with a forming pr
Source: Network

Essential knowledge for refractories industry personnel
Refractory materials generally refer to inorganic non-metal materials with a refractory degree above 1580 ℃ and able to withstand various physical and chemical changes and mechanical effects. Need to use professional refractory brick grinder to produce, S
Source: Network

How to buy or use refractory brick products?
The high-temperature properties of refractory materials are properties measured at high temperatures, such as: fire resistance, reburning line change, thermal shock resistance, slag resistance, load softening temperature and creep. The state of the refrac
Source: Network

Ways and methods to improve compressive strength of refractory bricks
Refractory bricks require high compressive strength, which is also an important performance basis for the selection and application of refractory bricks. So what ways can you improve the pressure resistance of refractory bricks? Shenyang refractory brick
Source: Network

What are the properties and applications of refractory materials?
If you want to produce good quality refractory materials, you need a good equipment. Shenyang Pengcheng Non-metal Equipment Co., Ltd. is a company specializing in the production and sale of refractory brick grinders. Let us understand the refractory mater
Source: Network

What are the methods and limitations of refractory brick forming?
Forming in the manufacture of refractory bricks refers to the process of refractory raw materials passing through the refractory brick grinder to process the blank into a blank of a predetermined size and shape by means of external forces and models. Howe
Source: Network

Mechanical properties and meaning of refractories often measured
The mechanical properties often measured in refractories are: tensile strength, compressive strength, flexural strength, impact strength, cohesive strength, erosion resistance, abrasion resistance, elastic modulus, torsional strength, and high-temperature
Source: Network

What are the main classifications of refractory materials produced by brick mills?
There are many types of refractory materials. Next, I will introduce some types of refractory materials.
Source: Network

Refractory Brick Mill Company Explains the Significance of New Refractories to Improve the Competitiveness of China's Iron and Steel Industry
From the above, we can understand the importance of refractories for current industrial production, and the increase in needs. Therefore, the demand for equipment of manufacturers of refractories, Shenyang Pengcheng Non-metal Equipment Co., Ltd. is a prof
Source: Network

Brick grinding machine manufacturers—the wide application and important role of refractory bricks in building fire protection
Refractory bricks are widely used in the refractory industry. Due to its high fire resistance, it is more versatile in fire protection applications. The main content of refractory bricks is aluminum oxide. The higher the content of refractory bricks, the
Source: Network

Four effective methods of refractory brick pressed by refractory brick grinder
Forming during the manufacture of refractory bricks pressed by refractory brick presses, it refers to refractory raw materials, and passes the external force to the mold.
Source: Network

Ministry of industry and information technology of the people's Republic of China
On August 5, the Ministry of industry and information technology issued a document to solicit opinions on 72 industry standard plan projects, including "technical guidelines for comprehensive utilization of waste heat from corundum smelting furnace&
Source: Network

The State Council cancels the license of refractory and other industrial products to help build a new system of refractory industry
Recently, the State Council issued the decision on adjusting the catalogue for the administration of production license of industrial products and strengthening the supervision during and after the event (hereinafter referred to as the decision). Accor
Source: Network

Ministry of industry and information technology proposed major provisions: large enterprises from small and medium-sized enterprises should pay within 30 days is a great news for refractory enterprises!
According to the website of the Ministry of industry and information technology, in order to promote state organs, public institutions and large enterprises to timely pay for small and medium-sized enterprises and safeguard the legitimate rights and i
Source: Network

Do not forget the original mind, remember the mission, go all out to promote the high-quality development of the industry -- the eighth member congress of China Refractory Industry Association was held in Zhengzhou
On September 24, 2019, the eighth member congress and the first meeting of the Eighth Council of China Refractory Industry Association were successfully held in Zhengzhou, Henan Province. Nearly 200 delegates from all over the country attended the
Source: Network

The 21st Shanghai International Metallurgical Industry Exhibition and the 7th Shanghai International refractory exhibition were successfully held in Shanghai
The 21st Shanghai International Metallurgical Industry Exhibition and the 7th Shanghai International refractory exhibition organized by Shanghai Shenshi Exhibition Service Co., Ltd. and sponsored by China Baowu iron and Steel Group Co., Ltd., China
Source: Network

Seminar on "public service platform for group standard preparation and revision" held in Beijing - China heat treatment furnace Expo
In order to better meet the needs of group standardization work, on the basis of the existing standardization work mode, and drawing on the work mode of advanced standardization organization, Shandong Institute of standardization, as a technical support
Source: Network

PMI of Markit manufacturing industry in UK in August - 2019 International Heat Treatment Exhibition
On Monday (September 2), in European session, the UK released important August PMI data of Markit manufacturing industry, which was not as expected. After the data was released, the short-term fluctuation of the pound against the US dollar was not big.
Source: Network

Booth recruitment of the 15th Shanghai international heat treatment and Industrial Furnace Exhibition in 2019
Shanghai international heat treatment and Industrial Furnace Exhibition "was founded in 2005 and has been successfully held for 14 times. It is committed to helping the upstream and downstream enterprises of heat treatment and industrial furnace e
Source: Network

Reflections on the Sino US trade war - Shanghai heat treatment and Industrial Furnace Exhibition 2019
The US trade war officially began in early 2018. From a historical point of view, it is also inevitable for economic and social development. Since 1893, the total economic output of the United States has been the first in the world, and it has been 126
Source: Network

India's manufacturing PMI fell to 51.4-2019 in August
India's manufacturing activity expanded at a slower pace in August due to weak domestic consumer and investment demand, with the Manufacturing Purchasing Managers Index (PMI) falling to 51.4 from 52.5 in July. Although it is still above 50, indicat
Source: Network

Nonferrous metals is expected to play the strongest tone in 2019
After a brief rally in July September, nonferrous metals futures have been quiet for nearly two months. Recently, some research institutions pointed out that under the resonance of supply contraction, low inventory and monetary easing, nonferrous metal a
Source: Network

60000 ㎡ exhibition area, 700 enterprises gathered, 50000 professional visitors!
Csfe - a comprehensive and multi-channel audience invitation plan to ensure the presence of professional buyers 1. Invited purchasers: Metallurgy (iron and steel, non-ferrous metals), casting and forging, heat treatment, mechanical manufacturing (mold, ba
Source: Network

Air pollution battle begins in autumn and winter! The average concentration of PM2.5 in Beijing, Tianjin, Hebei and surrounding areas will drop another 4% - 2019 in Shanghai heat treatment and Industrial Furnace Exhibition
Recently, 10 departments including the Ministry of ecological environment, the development and Reform Commission, the Ministry of industry and information technology and 6 provincial and municipal people's governments including Beijing, Tianjin and Hebei
Source: Network
  • 0+

    25 years of service for refractory enterprises
  • 0+

    More than 90 types of refractory processing equipment
  • 0+

    More than 100 independent R&D patents of the company
  • 0+

    More than 600 domestic and foreign cooperative enterprises